![background image](http://html1.mh-extra.com/html/omega/cn16pt/cn16pt_user-manual_4067472019.webp)
PLATINUM
TM
Series User’s Guide
19
Complete Menu Structure
3.2
Programming Mode Menu (PRoG)
The following table maps the Programming Mode (
) navigation:
Level
2
Level
3
Level
4
Level
5
Level
6
Notes
____
Process goal for PID, default goal for
oN.oF
ASbo
Setpoint 2 value can track
SP1
,
SP2
is an absolute value
dEVI
SP2
is a deviation value
Note:
This submenu is the same for all other Alarm configurations.
oFF
ALM.1 is not used for display or outputs
AboV
Alarm: process value above Alarm trigger
bELo
Alarm: process value below Alarm trigger
HI.Lo.
Alarm: process value outside Alarm triggers
bANd
Alarm: process value between Alarm triggers
Absolute Mode; use
ALR.H
and
ALR.L
as triggers
d.SP1
Deviation Mode; triggers are deviations from
SP1
d.SP2
Deviation Mode; triggers are deviations from
SP2
Alarm high parameter for trigger calculations
Alarm low parameter for trigger calculations
REd
Red display when Alarm is active
AMbR
Amber display when Alarm is active
GRN
Green display when Alarm is active
dEFt
Color does not change for Alarm
oFF
High High / Low Low Alarm Mode turned off
oN
____
Offset value for active High High / Low Low Mode
No
Alarm does not latch
yES
Alarm latches until cleared via front panel
botH
Alarm latches, cleared via front panel or digital input
RMt
Alarm latches until cleared via digital input
N.o.
Output activated with Alarm
N.C.
Output deactivated with Alarm
yES
Alarm active at power on
No
Alarm inactive at power on
Delay turning off Alarm (sec), default = 1.0
Delay turning off Alarm (sec), default = 0.0
Alarm 2
oUt1
is replaced by output type
Note:
This submenu is the same for all other outputs.
Output does nothing
PID Control Mode
Omega Engineering | www.omega.com
Содержание CN16Pt
Страница 1: ...CN32Pt CN16Pt CN16PtD CN8Pt CN8PtD Temperature Process Controllers...
Страница 60: ...Omega Engineering www omega com...
Страница 61: ...M5451 0415 Omega Engineering www omega com...