Section 1 - Introduction
Your BB700 Series Blackbody Calibration Source has been designed for ease of
use and reliability whenever you have the need to test or calibrate non-contact
infrared temperature instruments. It is important that you read this manual
completely and follow all safety precautions before operating this instrument.
1.1 Precautions
• Follow all safety precautions and operating instructions outlined in this
manual.
• Never leave your calibrator unattended when in use.
• Keep out of reach of children.
• Never touch the aperture plate or header cavity when hot.
• Never place any flammable or explosive material near the cavity opening.
• Do not operate in flammable or explosive environments.
• Never operate with a power cord other than the one provided with your unit.
• Remove or disconnect main power cord before attempting any maintenance or
fuse replacement.
• Do not connect this unit to a non-grounded, non-polarized outlet or power
source.
• This unit is intended for indoor use only. Avoid exposure to any moisture or
rain.
• Do not connect the serial ports to equipment with exposed, hazardous, live
voltages.
• The operator of this instrument is advised that if the equipment is used in
a manner not specified in this manual, the protection provided by the
equipment may be impaired.
There are no user serviceable parts inside your unit. Attempting to repair or service your unit may
void your warranty.
1.2
Safety Warnings and IEC Symbols
This device is marked with international safety and hazard symbols in
accordance with IEC 1010. It is important to read and follow all precautions and
instructions in this manual before operating or commissioning this device as it
contains important information relating to safety and EMC. Failure to follow all
safety precautions may result in injury and or damage to your calibrator. Use of
this device in a manner not specified by the manufacturer may impair protection
provided within the unit.
Introduction
1
1-1
NOTE: