1. Press the
once.
2. Use the
and
keys to select menu level.
3. Once the the desired menu appears, scroll through the parameters of that
menu using the
key.
4. Use the
and
keys to adjust a given parameter.
5. Press
to save settings and exit programming mode.
6. Re-enter the programming mode (from step #1) to access other menus.
Figure 7. Controller Programming Procedures
3.5
Temperature Reference Meter Settings
The high accuracy temperature reference meter has been calibrated at the factory
and need not be adjusted by the user except for setting the engineering units (°F
or °C), enabling or disabling the units indicator (ON/OFF), or setting the display
resolution (XXXXXX, XXXXX.X or XXXX.XX).
To change the engineering units:
1. Press the MENU key until the display reads “RDG.CNF.”
2. Press the MIN key until the display reads “RDG.5.”
3. Set this parameter as desired using the MAX key (“0”=°C, “1”=°F, “2”=°K).
4. Press MENU to store the settings.
5. Press RESET twice to save settings and return to normal operation mode.
To turn the engineering units indicator on or off:
1. Press the MENU key until the display reads “RDG.CNF.”
2. Press the MIN key until the display reads “RDG.6.”
3. Set this parameter as desired using the MAX key (“0”=units not displayed,
“1”=units displayed).
4. Press MENU to store the settings.
5. Press RESET twice to save settings and return to normal operation mode.
To select the display resolution:
1. Press the MENU key until the display reads “DEC PT.”
2. Press the MAX key to choose the desired resolution (FFFFFF, FFFFF.F, or
FFFF.FF).
3. Press MENU to store the settings.
4. Press RESET twice to save settings and return to normal operation mode.
Operation
3
3-7