![background image](http://html1.mh-extra.com/html/omega/2503-80-00/2503-80-00_user-manual_4227451008.webp)
16
17
English
Quartz chronograph
Operating instructions
2
Addition function
(crown in position 1):
•
Pusher A:
start
•
Pusher A:
stop to read time
•
Pusher A:
press again to restart
•
Pusher A:
stop
At the end of the last step, the chronograph indicates the total
time.
•
Pusher B:
reset
Split-time function
(split seconds, crown in position 1):
•
Pusher A:
start
•
Pusher B:
stop to read the split time.
The chronograph continues to operate.
•
Pusher B:
restart
The chronograph hands catch up with the elapsed time.
•
Pusher A:
for the last stop and to display the total time
•
Pusher B:
reset
NB:
the hands should be reset to their original position before the
chronograph is used:
– Resetting/Zeroing of the 30-minute totaliser hand: pusher B and
crown in position 2.
– Resetting/Zeroing of the 60-second totaliser hand: pusher A and
crown in position 3.
– Resetting/Zeroing of the 1/10th of a second hand: pusher B and
crown in position 3.
Í
The crown has 3 positions:
1.
Normal position (wearing position):
when the crown is
positioned against the case, the crown ensures that the watch is
water-resistant.
Occasional winding:
if the watch has not been worn for 60 hours
or more, wind it up with the crown in position 1.
2.
Time zone and correcting the date:
pull the crown out to
position 2. Turn the crown forwards or backwards; the hour hand
moves forwards or backwards in one-hour jumps. The date jumps
forwards or backwards each time the hour hand passes midnight.
Push the crown back to position 1.
NB:
when changing the time zone backwards, it is necessary
to move the hour hand back past 7pm to ensure the date
changes.
3.
Time setting:
hours – minutes – seconds. Pull the crown out to
position 3. The second hand will stop. Turn the crown forwards or
backwards. Synchronise the seconds by pushing the crown back to
position 1 to coincide with a given time signal.
Manual & Self-winding watch
Operating instructions
2
Í
The crown has 3 positions:
1.
Normal position (wearing position):
when the crown is
positioned against the case, the crown ensures that the watch is
water-resistant.
Occasional winding:
if the watch has not been worn for
55 hours or more, wind it up with the crown in position 1.
CALIBRES 8601, 8611
(fig. I
bis
)
CALIBRES 8500, 8501
(fig. I)
OMEGA_V12-I.indb Abs1:16-Abs1:17
OMEGA_V12-I.indb Abs1:16-Abs1:17
28/12/09 18:30:27
28/12/09 18:30:27