![background image](http://html1.mh-extra.com/html/omega/2503-80-00/2503-80-00_user-manual_4227451013.webp)
26
27
English
Self-winding chronograph with date
Operating instructions
2
Calibres 3888, 3890 (fig. XXI)
Correcting the day:
pull the crown out to position 2, turn the
crown backwards, then push the crown back to position 1.
Note:
in the quick mode, the date is changed in two steps. Check
that the date hand (calibre 3888) or day disc plate (calibre 3890)
is centred after the change has been made.
Date-setting is not recommended between 10pm and 2am. During
this time lapse and under certain conditions, a safety element can
prevent these corrective functions from working.
3.
Time setting:
hours – minutes – seconds. Pull the crown out to
position 3. The seconds hand will stop. Turn the crown forwards or
backwards. Synchronise the seconds by pushing the crown back to
position 1 to coincide with a given time signal.
Chronograph functions:
•
Pusher A:
start – stop, start – stop, etc.
Timing to 1/8th of a second for up to 12 hours or up to 7 days for
calibres 3888 and 3890.
•
Pusher B:
reset (after a stop).
Note:
the chronograph must always be stopped before the zero
resetting function is used. Never push the chronograph’s two pushers
(A and B) simultaneously (calibres 3301, 3303 and 3313).
Self-winding split-seconds chronograph
Operating instructions
2
CALIBRE 3600
(fig. XVII)
CALIBRE 3612
(fig. XVIII)
Í
Watch functions (calibre 3600)
The crown has 2 positions:
1.
Normal position (wearing position):
when the crown is posi-
tioned against the case, the crown ensures that the watch is water-
resistant.
2.
Time setting:
hours – minutes – seconds. Pull the crown out to
position 2. The seconds hand will stop. Turn the crown forwards or
backwards. Synchronise the seconds by pushing the crown back to
position 1 to coincide with a given time signal.
Watch functions (calibre 3612)
The crown has 3 positions:
1.
Normal position (wearing position):
when the crown is posi-
tioned against the case, the crown ensures that the watch is water-
resistant.
2.
Correcting the date:
pull the crown out to position 2, turn the
crown backwards, then push the crown back to position 1.
NB:
the date cannot be corrected between 9pm and 12.30am.
3.
Time setting:
hours – minutes – seconds. Pull the crown out to
position 3. The seconds hand will stop. Turn the crown forwards or
backwards. Synchronise the seconds by pushing the crown back to
position 1 to coincide with a given time signal.
Occasional winding:
if the watch has not been worn for 45 hours
(calibre 3600) or 55 hours (calibre 3612) or more, wind it up with the
crown in position 1.
Chronograph functions:
•
Pusher A:
start - stop, start - stop, etc.
Timing to 1/8th of a second for up to 12 hours.
OMEGA_V12-I.indb Abs1:26-Abs1:27
OMEGA_V12-I.indb Abs1:26-Abs1:27
28/12/09 18:30:33
28/12/09 18:30:33