16
unit. If the DHCP setup status is AUTOMATIC, user
can set the IP port only.
z
If the DHCP setup status is MANUAL, user must set
all parameters.
z
For more detail informations refer to ‘NETWORK
CONFIGURATION’.
z
CONNECTION SETUP
-
TIME OUT: Adjust TIMEOUT value properly to
successfully access to DVR unit via Internet line. If
data transmission speed is high enough, leave
TIMEOUT value as set by manufacturer (200 msec),
and increase it if data transmission via Internet line is
relatively slow. Execute tracert (Tracing Route) in your
PC for IP assigned to DVR unit, and you can figure
out how much TIMEOUT value increased.
-
RETRY COUNT: Set the retry number of times for
network connection.
z
DHCP SETUP
z
If you want Static IP, select MANUAL and input
IP/DNS information at ‘IP CONFIG SETUP’ manually.
z
If you want Dynamic IP, select AUTOMATIC. Select
‘DETECT IP’ and press
ENTER
key to get IP
information.
z
DDNS SETUP
z
Set DDNS ON/OFF to ‘ON’
z
DNS
SERVER:
-
In case of Dynamic IP: DNS address will be
automatically assigned.
-
In case of Static IP: User shoud input address
manually.
z
INTERVAL means connection interval time between
DVR and JPEC2000 DDNS SERVICE server.
(D = Day, H = Hour, M = Minute)
z
Go down to REGISTER and press
ENTER
to renew
IP being registered in JPEG2000 DDNS SERVICE
server.
6.6.2 RS232C
Setup
z
User can control the DVR via RS-232C port.
z
Connect DVR to PC via RS-232C port and control
DVR using keyboard of PC.
z
This function is mainly for programmer who wants to
control DVR as part of many devices connected to PC
system, as in SI project.
6.6.3 Pan/Tilt
Setup
z
It is to set parameters for PTZ camera connected to
DVR unit.
z
DVR unit already includes all protocols of well-known
PTZ cameras like PELCO D type PTZ camera, and
user just select MODEL and set other parameters to
control this PTZ cameras, using operation buttons on
the front panel of DVR.
z
If PTZ camera whose protocol is not incorporated into
this DVR unit, user must input protocol of this PTZ
camera by himself. Using USB device port, user can
upgrade protocol for PTZ camera.
CONNECTION SETUP
TIMEOUT 200 MSEC
RETRY COUNT 08
SELECT:
▲▼
, CHANGE VALUE :
+ -
DHCP SETUP
DHCP MODE AUTOMATIC
DETECT IP
DNS SERVER 192.168.001.001
IP ADDRESS 192.168.001.161
SUBNET MASK 255.255.255.000
GATEWAY 192.168.001.001
SELECT MENU :
▲▼
, & [ENTER]
RS232C SETUP
SPEED 115200
LENGTH 8
STOP BIT 1
PARITY NONE
SELECT:
▲▼
, CHANGE VALUE :
+ -
PANTILT SETUP
COMMAND SETUP
SPEED SETUP
SELECT MENU :
▲▼
, & [ENTER]
DDNS SETUP
DDNS ON/OFF OFF
DNS SERVER 255.255.255.255
INTERVAL D-00 H-00 M-20
RESISTOR
----------------------------------------------------------------
DNS STATUS
IP ADDRESS
---.---.---.---
IP PORT
-----
REMAIN TIME D-00 H-00 M-20
LAST REGISTRATION DATE
SELECT MENU :
▲▼
, & [ENTER]
