OMEGA AIR RDP Series, Инструкция по установке и эксплуатации

Страница: 9 / 40

9
3.2 Specifications
TECHNICAL SPECIFICATIONS
Max. operating pressure 14 bar
g
Max. inlet air temperature 55 °C (for temperature ≠ 35 °C apply correction factor)
Operating ambient temperature 1,5 °C to 45 °C (for temperature > 25 °C apply correction factor)
Pressure dew point + 3 °C
Filter requirement (inlet) Prefilter 3 μ m
Communication RS-485, MODBUS
Digital input Remote ON/OFF
Type of cooling Air cooled
Compressor operation Non-cycling
Condensate drain Automatic (Zero loss type)
Voltage, Frequency 230 V, 50 Hz (RDP 20-600) 400V, 50 Hz (RDP 750-1900)
Refrigerant R134a
Protection class (controller front) IP 65
Handling option Manual (RDP 20-100), Forklift (RDP 140-1900)
MATERIALS
Casing Carbon steel
Casing corrosion protection Epoxy powder paint
Evaporator Brazed plate stainless steel
Evaporator insulation Polyurethane foam
Condenser Copper tube, aluminium fins
Compressor Carbon steel
Refrigerant piping Copper
Controller enclosure Plastic
SIZES
Compressed air Electrical connection Ambient air Refrigerant Dimensions & Mass
Model (3) Flow Connection Pressure
drop
Power supply (4) Power/
Consumption
Cooling
flow
Heat
rejec.
Type Mass W x L x H Net
m 3 /h bar Ph~V-Hz kW m 3 /h kW kg mm kg
RDP 20 20 G 3/8” BSP -F 0,2 1~230-50* 0,160 / 0,135 250 0,2 R134a 0,190 352 x 485 x 499 25
RDP 35 35 G 3/8” BSP -F 0,2 1~230-50* 0,170 / 0,135 250 0,3 R134a 0,230 352 x 485 x 499 25
RDP 50 50 G 3/4” BSP -F 0,2 1~230-50* 0,20 / 0,18 250 0,4 R134a 0,330 352 x 485 x 499 26
RDP 75 75 G 3/4” BSP -F 0,2 1~230-50/230-60 0,40 / 0,25 250 0,6 R134a 0,380 352 x 485 x 499 27
RDP 100 100 G 3/4” BSP -F 0,2 1~230-50/230-60 0,45 / 0,32 400 0,8 R134a 0,585 352 x 485 x 499 32
RDP 140 140 G 1” BSP -F 0,2 1~230-50/230-60 0,50 / 0,38 700 1,1 R134a 0,61 357 x 552 x 684 50
RDP 180 180 G 1” BSP -F 0,2 1~230-50* 0,60 / 0,45 700 1,5 R134a 0,71 357 x 552 x 684 52
RDP 235 235 G 1” BSP -F 0,2 1~230-50* 0,73 / 0,60 700 1,9 R134a 0,89 357 x 552 x 684 56
RDP 300 300 G 1 1/4” BSP -F 0,2 1~230-50/230-60 1,20 / 0,95 1100 2,4 R134a 1,07 496 x 589 x 827 84
RDP 380 380 G 1 1/4” BSP -F 0,2 1~230-50/230-60 1,40 / 1,08 1100 3,1 R134a 1,20 496 x 589 x 827 90
RDP 480 480 G 1 1/2” BSP -F 0,2 1~230-50/230-60 1,45 / 1,20 1100 3,9 R134a 1,31 496 x 589 x 827 99
RDP 600 600 G 2” BSP -F 0,2 1~230-50/230-60 1,50 / 1,25 2200 4,9 R134a 1,59 491 x 710 x 973 110
RDP 750 750 G 2” BSP -F 0,2 3~400-50/440-60 2,2 / 1,6 2200 6,1 R134a 2,19 491 x 710 x 973 120
RDP 950 950 G 2” BSP -F 0,2 3~400-50/440-60 2,7 / 2,1 2200 7,7 R134a 2,55 491 x 710 x 973 150
RDP 1150 1150 G 2 1/2” BSP -F 0,2 3~400-50/440-60 2,8 / 2,2 1900 9,4 R134a 3,49 663 x 856 x 1534 250
RDP 1300 1300 G 2 1/2” BSP -F 0,2 3~400-50/440-60 3,2 / 2,6 1900 10,6 R134a 3,25 663 x 856 x 1534 280
RDP 1500 1500 G 2 1/2” BSP -F 0,2 3~400-50/440-60 3,3 / 2,7 4600 12,2 R134a 5,00 663 x 856 x 1534 290
RDP 1900 1900 G 2 1/2” BSP -F 0,2 3~400-50/440-60 4,2 / 4,0 3800 15,5 R134a 5,30 663 x 856 x 1534 310
RDP 2600 2600 DN100 0,2 3~400-50* 8,0 / 3,3 4000 16,1 R134a 8,0 1044 x 1467 x 1797 500
↓
Larger sizes available upon request
↓
(3) Nominal conditions: inlet flow 20 ° C at 1 bar
a
, ambient 25 °C, dryer inlet 35° C at 7 bar
g
, 3 °C pressure dew point (- 20,5 °C atmospheric).
(4)
For 60 Hz 20 % more than stated, consumption at nominal conditions.
* Special 60 Hz version available.