Omcan Santos 62, Инструкция по эксплуатации

Страница: 17 / 40

17
Troubleshooting
• Choose a different recipe with slower speeds.
The appliance resets while it is operating:
Eliminate all multiple power sockets and plug the appliance into its own individual power supply.
Noises, vibrations, leaks at jar blade level:
• Check the blade is correctly tightened (first dismantle the blade bearing).
• Replace the bearing seals.
See the chapter: “Changing the blade”.
If the problem persists, turn the appliance electric power off (unplug the mains power cord (4)) and call on
someone from the maintenance department or contact an approved Omcan dealer.
Problem with the recipes:
A few basic rules make it easier to understand how a blender works and thus know how to adapt the recipe
cycles to the products being processed.
Note: Do not overload the appliance: it is better to run a short recipe twice rather than double the
quantities and cycle time: prolonged operation heats the food due to friction and affects the desired
texture with the recipe.
The final mixture is too hot. Once an evenly mixed texture has been obtained, carrying on blending will make
the food heat up: reduce the speed or recipe time.
The final mixture is not even in texture:
• The recipe is not appropriate for the quantity and products processed; reduce the quantity of food in the jar,
increase the cycle time, use smaller pieces of food (having evenly sized pieces of food makes it easier to
carry out the recipe).
• Liquid is needed to make the solid food reach the blade. Increase the amount of liquid, pour in the liquid
before adding the solid foods.
Ice cubes remain stuck to the jar walls:
• Reduce the quantity of ice cubes when they are processed without any liquid.
• It is better to add liquid with the ice cubes, always putting the liquid in first.
The mixture “bounces” fast up and down the jar:
• Reduce the speed to adapt it to the quantity being processed so that the blade is constantly immersed in
the mixture. The recipe will take place more quickly and the mixture will be more even. High speeds are not
suitable for recipes with small quantities.
• Increase the amount of product being processed.