Omcan Santos 62, Инструкция по эксплуатации

Страница: 14 / 40

14
Maintenance
Changing the blade:
Dismantle the complete bearing assembly.
(see previous section)
Dismantling the blade.
Hold the blade coupling (24) in position with multiple slip joint pliers, and unscrew the fixing nut (13) using a
size 12 hexagon wrench (counter-clockwise).
Fitting the blade:
Take care to comply with the order given for assembly of the various components:
1. Lipped seal (15) (be sure to install correctly with lip downwards),
2. Thrust washer (14),
3. Blade (11) (recesses upwards),
4. Thrust washer (14) (the lipped seal must be pushed far enough for the square of this washer to work with
the square of the shaft)
5. Fixing nut (13) (tighten the nut by hand, checking that the washer in point 4 is correctly positioned relative
to the square of the shaft.
11
12
13
14
14
15
16
17
18