Omcan RS-CN-0230, Инструкция по эксплуатации

Страница: 10 / 20

10
Maintenance
1. Cabinet Cleaning:
The product should be cleaned once a week with the power supply disconnected. In cleaning please use
water or non-corrosive cleansers. Do not wash it directly with a water faucet.
2. Cleaning for Filter:
• If the error message “EE4” appears on the display, please clean the filter immediately. After cleaning, if the
error message “EE4” appears again, please contact Omcan.
Instructions for Cleaning:
• Before cleaning, please make sure the device has been disconnected from the power socket. Pull out the
handle of the front bottom base panel.
• Open the front bottom base panel, take out the filter and clean it.
3. Leaking Check. Observe all connectors and welding joints for oil stain, which indicates a must for patching
measures or call Omcan.
4. Frequently observe the operation of the product. In case of any abnormal noise, smell or smog, cut the
power supply immediately and call Omcan for help. Do not restart the product before the problem is fixed.
5. Omcan will not be responsible for any accident or damage incurred by failure to follow these instructions.
SERVICE
• To maintain good refrigeration performance, a refrigeration service person should be called periodically
(at least twice a year) to clean the discharge honeycomb and remove any accumulated dirt from the
condenser coil and condensate evaporator pan on self-contained models. POOR CIRCULATION OF AIR
THROUGH THE CONDENSER COIL WILL RESULT IN POOR REFRIGERATION PERFORMANCE.
• Dirt accumulation inside the condensate evaporator pan will reduce the pan’s capacity and affect the
efficiency of the heater causing a burned out heater and an overflow of defrost water onto the store floor.