14
Troubleshooting
The table below indicates the most common problems that may arise during slicing and the necessary
remedies.
PROBLEM
POSSIBLE CAUSE
REMEDY
The machine does not start
when the white or green button is
pressed.
No power supply.
Ascertain that the plug is correctly
inserted.
The blade guard is not correctly
positioned.
Check.
Defective electrical control circuit.
Call technical assistance.
When the switch is turned or
when the white or green button is
pressed, the machine starts, but
the white functioning light is not on.
Defective indicator.
Do not use the machine when the
pilot lamp is not on; Call technical
assistance.
The machine starts, but there are
vibrations. The motor is very hot
and there is a bad smell.
Defective motor or transmission.
Do no use the machine, call
technical assistance.
Under strain, the machine slows
down or comes to a stop.
Defective transmission.
Call technical assistance.
Excessive resistance to product
slicing.
The blade is blunt.
Sharpen the blade.
The slices are ragged and/or
shaped irregularly.
The blade is blunt.
Sharpen the blade.
The blade is excessively worn out. Call technical assistance.
Unsatisfactory blade sharpening.
Worn wheels.
Replace the wheels; call technical
assistance.
The product tray does not slide.
Guides are insufficiently lubricated. Lubricate.
When the switch is turned or when
the black or red button is pressed,
the machine does not stop.
Defective electrical control circuit.
Stop the machine, unplug
from mains and call technical
assistance.
DISMANTLING THE SLICER
These machines are made of the following elements:
•
Aluminium frame.
• Stainless steel fittings and others.
•
Electrical parts and cords.
•
Electrical motor.
•
Plastic materials, etc.
Whether dismantling is entrusted to third parties or done in-house (in that last case you will have to separate
the various materials) please note that disposal of the materials can only be carried out by duly authorized
businesses. In any case, please comply to the current norms of your country.
Содержание MS-IT-0220-C
