Omcan MS-IT-0220-C, Инструкция по эксплуатации, Страница: 10 / 36

10
Maintenance
CLEANING THE SLICER
GENERAL
The machine must always be accurately cleaned at least once a day , and more often if necessary.
Always use protective gloves.
DISASSEMBLING THE MACHINE FOR CLEANING
• Disconnect the plug from the mains.
• Turn the gauge plate know to ‘0’.
• Remove the various components as described in the following paragraphs.
• Unscrew (counterclockwise) the blade guard tie-rod.
• If the blade guard is blocked, press on the rod knob to move it a little.
• Extract the rod and remove the blade guard using for this operation only the side knobs.
• Loosen and remove the two fixing screws with knurled head.
• Remove the slice guard.
Operation
• Secure by means of the product grip by exerting a slight pressure.
• Adjust the thickness gauge. Start the blade by turning the switch or by pressing on the white or green
button.
• Grip the handle affixed onto the plate and start the forward and backward cutting movement. The product
travels towards the guide plate by gravity.
• When the product weight or its dimensions do not provide a satisfactory cut by effect of the gravity, use the
product grip handle.
• When finished, return the thickness control knob to ‘0’ and draw the carriage back.
• Stop the blade by pressing the black or red button.