Omcan MG-CN-0032-M, Инструкция по эксплуатации

Страница: 9 / 16

9
Maintenance
Follow the steps as listed:
FREQUENCY PERSONNEL CATEGORY SOLUTIONS
At the end of
every use and
before daily use.
Operator DISINFECTION Use PH neutral detergents.
Use demineralized water if temperatures exceed
60°C/140°F.
If any other products are used, they must be
adequate to the materials being disinfected.
PERIODS
OF LONG
INACTIVITY
If the machine has been inactive for a long period
of time, vigorously wipe the machine with a cloth
soaked in Vaseline to create a protective barrier.
PRODUCTS NOT
TO USE
Compressed or pressurized air jets.
Vapor equipment.
Detergent that contains any of the following
compounds:
- Bleach.
- Hydrochloric acid.
- Products that are used to clear drains.
- Caustic soda products for cleaning marble.
- Etc.
Steel wool, brushes or abrasive discs produced with
other metals or alloys, or tools that have previously
cleaned other metals or alloys.
Detergents in abrasive dust.
Fuel, solvents or inflammable and/or corrosive
fluids.
Substances used to clean silver.
Troubleshooting
The following indicated problems that may occur:
TYPE POTENTIAL CAUSE/S SOLUTIONS
The electrical supply is not
adequate.
General blackout. Contact an electrician.
Blown fuse. Replace the fuse, if the problem
continues, contact an electrician.