Omcan MG-CN-0032-M, Инструкция по эксплуатации

Страница: 6 / 16

6
Installation and Operation
TRANSPORTATION, HANDLING AND STORAGE
All transportation and handling operations must be performed from trained personnel and must have read and
understood the safety precautions mentioned in this manual.
1. Perform the machine handling and transportation only when unplugged.
2. Verify that the lifting means are able to support the loading weight and overall dimensions in safe
conditions.
3. Avoid dropping or shaking the unit during transportation.
PREPARATION PRELIMINARY OPERATIONS
STABILITY
The machines stability is designed so that it can be used without the risk of falling or unwanted movement.
ELECTRICAL SUPPLY
The electrical supply connection must be in conformance with the country legislation in which it is being used.
1. The electrical supply must match the required specifications indicated on the rating plate. If excessive
voltages are applied, some components will be damaged beyond repair.
2. The device must be grounded in conformance to the local standards.
3. The electrical supply cable outside the machine cover must be adequately protected.
GRINDING GROUP ASSEMBLY / DISASSEMBLY
The assembly / disassembly operations of any machine part are performed with the machine in the OFF
Model MG-CN-0032-M
Microswitch Yes
HP 2
Head Size 32
RPM 190
Throat Opening 2.75” / 70mm
Hopper Size 19.75” x 14” x 2.75” / 502 x 356 x 70mm
Electrical 110V / 60 / 1
Weight 134 lbs. / 61 kgs.
Dimensions 21.75” x 22” x 14” / 552 x 559 x 356mm
Item Number 43628
Technical Specifications