Omcan CM-CN-0200, Инструкция по эксплуатации, Страница: 9 / 24

9
2. You can adjust the water quantity before the draw-off operation using the Rotary switch. The adjusted value
(ML) refers to 1 cup.
3. You can stop the draw-off operation at any time by pressing any coffee draw-off key.
4. You can check the water quantity used for the last draw-off operation by pressing the Rotary switch.
[This will appear on the screen: READY] Put 2 cups under the adjustable coffee spout.
5. Press the draw-off key for 2 cups. [This will appear on the screen: 2 CUPS / 120 ML] (water quantity last
adjusted) The illuminated ring is active.
6. Turn the Rotary switch again to select the water quantity individually. For example: 210 ML / 2 CUPS
7. Your product is being prepared. [This will appear on the screen: READY]
DRAWING OFF PRE-GROUND COFFEE
1. Never use instant coffee or quick-coffee. We recommend that you always use powder from fresh coffee
beans or pre-ground, vacuum-packed coffee. Never fill in more than 2 portions of powder. The pre-ground
coffee tank is no storage tank. Make sure that the pre-ground you use is not too fine. This may cause
blocking of the system. In this case, the coffee only drips out of the coffee spout.
2. If you have filled in too little powder, the message ADD MORE POWDER will be displayed. The coffee
machine stops the operation and returns to “ready for draw off” mode.
3. You can stop the draw-off operation at any time by pressing any coffee draw-off key. [This will appear on
the screen: READY]
4. Put 1 or 2 cups under the adjustable coffee spout.
5. Open the cover of the filler funnel for pre-ground coffee. [This will appear on the screen: FILL / POWDER]
6. Fill 1 or 2 spoonfuls of pre-ground coffee in the filler funnel for pre-ground coffee and close the cover. [This
will appear on the screen: SELECT / CUP / BUTTON]
7. Press the required draw-off key for 1 cup or 2 cups. 120 ML (water quantity last adjusted). The illuminated
ring is active. [This will appear on the screen: POWDER]
8. Turn the Rotary switch again to select the water quantity individually. For example: 210 ML [This will appear
on the screen: POWDER]
9. Your product is being prepared.
DRAWING OFF HOT WATER
1. If you do not change the settings using the Rotary switch, the water quantity last adjusted will be drawn off
automatically.
2. Install the hot water nozzle to obtain perfect water flow. Do not replace the replaceable hot water nozzle
directly after drawing off water because the nozzle is hot after the draw-off operation.
3. At the start of the water draw-off operation, there can be splashing. Avoid direct contact with the skin.
4. Place a cup under the replaceable hot water nozzle.
5. Open the steam/hot water draw-off tap. The illuminated ring is active. For example: 140 ML [This will
appear on the screen: WATER]
6. Adjust the required water quantity by turning the Rotary switch. For example: 200 ML [This will appear on
the screen: WATER]
7. If the required water quantity is reached, the following message is displayed: CLOSE TAP
8. Close the steam/hot water draw-off tap. [This will appear on the screen: READY] Before CLOSE TAP, water
may still escape the system.
Operation