Omcan CM-CN-0200, Инструкция по эксплуатации, Страница: 7 / 24

7
• A fine grinding degree for bright roasts (the smaller the dots, the finer the grinding)
• A coarse degree for dark roasts (the larger the dots, the coarser the grinding)
1. The grinding degree may only be adjusted while the grinding gear is running.
2. Open the bean tank cover and remove the aroma preservation cover.
3. To adjust the grinding degree, turn the Rotary switch to the required position.
POWER SWITCH
Activate the power switch on your coffee machine before using the machine for the first time. We recommend
that you switch off your coffee machine with the power switch if you intend not to use it for a longer period of
time (e.g.during holidays).
FIRST USE
1. Fill coffee beans in the bean tank.
2. Switch on the coffee machine using the ON/OFF key. [This will appear on the screen: LANGUAGE
ENGLISH] The illumirated ring is active.
3. Turn the Rotary switch until the required language is displayed.
4. Confirm your selection by pressing the Rotary switch. [This will appear on the screen: FILL WATER]
5. Fill the water tank with fresh water. [This will appear on the screen: OPEN / TANK]
6. Place an empty cup under the replaceable hot water nozzle.
7. Open the steam/hot water draw-off tap. [This will appear on the screen: FILLING SYSTEM / CLOSE / TAP]
8. Close the steam/hot water draw-off tap. [This will appear on the screen: HEATING / PRESS / RINSE]
9. Press the maintenance key. Machine carries out a rinsing operation [This will appear on the screen:
RINSING / READY]
10. If FILL BEANS is displayed, press the coffee draw-off key again. Machine not filled with coffee beans yet.
To get an excellent froth, adjust the coffee spout to the size of your cup.
INSTALLATION OF CLARIS PLUS FILTER CARTRIDGES
If the Claris plus filter cartridge is installed properly, de-scaling of the coffee machine is no longer required.
INSTALLING THE FILTER
1. Fold up the cartridge holder. Install the filter cartridge in the water tank, applying a gentle pressure.
2. Fold down the cartridge holder again until it engages audibly.
3. Fill the water tank with cold, fresh tap water and install it again.
4. Press the programming key. The illuminated ring is active. [This will appear on the screen: FILTER]
5. Press the Rotary switch to start the programming.
6. Turn the Rotary switch until the following message is displayed: YES
Press the Rotary switch to activate the filter cartridge.
7. Put a sufficiently large container (approx. 1L) under the replaceable hot water nozzle.
8. If not installed already, insert the Claris plus filter.
9. Open the steam/hot water draw-off tap. [This will appear on the screen: RINSING / FILTER / CLOSE TAP]
10. Close the steam/hot water draw-off tap. Now the coffee machine will heat up to coffee temperature.
[This will appear on the screen: HEATING / READY]
11. The filter is now activated. In Programming Mode, the water hardness selection function is no longer
displayed.
Installation