Omcan CM-CN-0200, Инструкция по эксплуатации, Страница: 17 / 24

17
SYMPTOMS POSSIBLE CAUSE
Very loud noise coming from the grinding gear Foreign body in grinding gear: Drawing off pre-
ground coffee still possible. Have the coffee machine
checked by Omcan
Too little froth when frothing milk 2-stage frothing jet blocked: Clean 2-stage frothing jet
2-stage frothing jet in wrong position: Draw off steam
Coffee only drips from the coffee spout Grinding degree too fine: Coarser grinding gear
adjustment
Pre-ground coffee too fine: Use a coarser pre-ground
coffee
DISPLAY CAUSE REMEDY
Fill Water Water tank is empty Refill water
Float defective Rinse or de-scale water tank
Fill coffee beans Bean tank is empty Refill beans
Although you have refilled beans,
the message still appears
Draw off a cup of coffee.
The message will disappear only
after you have drawn off a cup of
coffee
Empty grounds Coffee grounds container full Empty coffee grounds container
Tray reinstalled too early after
emptying
Wait 5 sec. before reinstalling the
tray
No tray / tray missing Drip tray not installed properly or
missing
Install tray properly
Ready clean Cleaning required Start cleaning program
Troubleshooting
Maintenance
3. Draw off steam until the water/steam mixture is clean.
4. If necessary, disassemble the Professional-Cappuccino Frother and thoroughly rinse the flow regulator with
water.
5. For proper cleaning, use the machine auto cappuccino cleaning agent This is available at retail. Daily
cleaning is recommended.
SWITCHING OFF THE COFFEE MACHINE
1. To ensure perfect operation, please switch your coffee machine to standby mode with the (3) symbol first
then switch the machine off using the power switch. [This will appear on the screen: READY]
2. Switch off the coffee machine using the ON/OFF key. [This will appear on the screen: RINSING]
3. An automatic rinsing operation is started.