Omcan CM-CN-0200, Инструкция по эксплуатации, Страница: 8 / 24

8
Operation
ADJUSTING THE WATER QUANTITY FOR COFFEE
1. The indicated value in ML is a reference value and may deviate from the actual value.
2. If you press the draw-off key for 2 cups, the water quantity is doubled automatically.
3. You can change/stop the water quantity during the draw-off operation, too. Turn the Rotary switch until the
required ML value is displayed. You can adjust the water quantity in steps of 5 ML using the Rotary switch.
[This will appear on the screen: READY]
4. Turn the Rotary switch until the required water quantity is displayed. For example: 120 ML
DRAWING OFF 1 CUP OF COFFEE
1. You have the possibility of increasing the strength of the coffee at any time in the grinding process by
pressing the 1- cup draw-off key again. For example: by pressing the 1-cup draw-off key three times, you
get strong coffee. [This will appear on the screen: STRONG]
2. You can choose among three strengths at the push of a button.The longer you press the draw-off key for 1
cup, the stronger your coffee will be. [DISPLAY: MILD / NORMAL / STRONG]
3. You can adjust the water quantity before the draw-off operation using the Rotary switch.
4. You can stop the draw-off operation at any time by pressing any coffee draw-off key.
5. You can check the water quantity used for the last draw-off operation by pressing the Rotary switch.
[This will appear on the screen: READY]
6. Put a cup under the adjustable coffee spout.
7. Press the draw-off key for 1 cup until the required strength is displayed: MILD / 180 ML (water quantity last
adjusted) The illuminated ring is active .
8. Turn the Rotary switch again to select the water quantity individually. For example: 160 ML / MILD
9. Your product is being prepared. [This will appear on the screen: READY]
DRAWING OFF 2 CUPS OF COFFEE
1. Selecting the coffee strength is not possible when drawing off 2 cups of coffee. You will draw off 2 mild cups
automatically.
REPLACING THE FILTER
1. After drawing off approximately 50 litres, the filter cartridge will be used up. A message requesting you to
replace the filter will appear on the display. [This will appear on the screen: READY / FILTER]
2. Switch off the coffee machine using the ON/OFF key.
3. Press the maintenance key until the following message is displayed: CHG FILTER / OPEN TAP
4. Remove the water tank from the machine and empty it.
5. Fold up the cartridge holder. Install the filter cartridge in the water tank, applying a gentle pressure.
6. Fold down the cartridge holder again until it engages audibly.
7. Fill the water tank with cold, fresh tap water and reinstall it.
8. Place a sufficiently large jug (approximately 1L) under the replaceable hot water nozzle and open the
steam/hot water tap. [This will appear on the screen: RINSING / FILTER / CLOSE TAP]
9. Close the steam/hot water draw-off tap. [This will appear on the screen: HEATING / READY]
Installation