Omcan 0038-D, Инструкция по эксплуатации

Страница: 8 / 28

8
Maintenance
Operation
Troubleshooting
SAFETY PRECAUTIONS
Before performing any maintenance operations, including cleaning, take the following precautions:
• Ensure that the oven is not working end completely cold.
• Ensure that the electrical power is not present.
• Make certain that the electrical power cannot be accidentally reinserted. Disconnect the plug from the
electrical power socket.
• Use individual protection devices in compliance with the directive 89/391/CEE.
• Always operate using appropriate maintenance tools.
• Once maintenance and repairs are finished, before starting up the oven, reinstall all of the protection
devices and reactivate all of the safety devices.
ORDINARY MAINTENANCE FOR THE USER
As any equipment also our ovens requires simple, frequent and careful cleaning to ensure efficient, regular
functioning. It is recommended to never use chemical products which are not specific for food preparation
areas, abrasives or corrosives for any reason. Avoid by all means using water jets, tools, rough or abrasive
instruments, such as steel wool, brillo sponges or any other item which could damage the surface of the
machine, and especially those that could compromise health safety. Oven external areas cleaning, external
parts in stainless steel, door glass, and switch panel, must be carried out at cold oven and at disconnected
electric power supply. Use a sponge or a soft cloth, not abrasive, slightly humidified with water or possibly with
a neutral detergent not corrosive. In any case, do not use water jets which can penetrate through the electric
parts and heavily damage them, as well as bring a possible danger for people.
SHUT DOWN PHASE
To shut down the oven turn the thermostat to the position “0”.
SYMPTOM POSSIBLE CAUSE SUGGESTED REMEDY
The oven does not heat even
though the temperatures are set
correctly. The pilot lights are off.
Main switch in position “0”. Turn the main switch in position
“1”.