21
We selected last 20
FAULTS
to show.
Press
EXIT
Go to
SET EBS1 AUTO
and press
SET.
PA will automatically set 20mA on the tube.
When finished successfully, you will see SET
EBS1 AUTO OK on the screen
You can try to do this manually, too.
Scroll to
SET EBS1 MANUAL
and press
SET.
Use up/down buttons to set 20mA or as close
as possible value and press
SAVE
.
Similar ways
EBS2
can be preprogrammed
( 300 mA FU-728F).
Or another value of EBS2 by MANUAL Set.
Scroll to
CALIBRATION Ip, Is
and press
SET
.
Calibration will be done automatically.
Type of supported TCVR and working
frequency are visible on the display.
AUTO LED is ON.
Type of supported TCVR and working
frequency are visible on the display.
AUTO LED is ON.
Type of supported TCVR and working
frequency are visible on the display.
AUTO LED is ON.
Type of supported TCVR and working
frequency are visible on the display.
AUTO LED is ON.
