13
OPR/STBY
-
Short press for switching between STBY and OPERATION mode.
ON/OFF
-
Long press (hold for a 1 sec.) for switching the PA ON (first start to tube heating), 2
seconds for PA OFF. Always first use the ON/OFF push button as this allows for a predetermined
(software controlled) time to cool down the tube and inside the PA compartment.
5.2.
control
Turn ON the green Main Power switch and the
home screen
lights up. Initial control touch buttons are
visible on the bottom line.
Remember that the touch screen is active for
some information, while the PA is still OFF!
Information display shows basic information
about the PA: serial number, software
version, time ON, tube serial number and
nominal mains voltage.
The information screen also provides an
overview of the last 20 warnings and faults.
Press
FAULTS.
Press
EXIT
to go back to the home screen.
Type of supported TCVR and
working
frequency are visible on the
display.
AUTO LED is ON.
Type of supported TCVR and
working
frequency are visible on the
display.
AUTO LED is ON.
Type of supported TCVR and
working
frequency are visible on the
display.
AUTO LED is ON.
