39
4
Menu setting method
Menu setting method
a
b
[
HQ
]:
Monaural high quality sound recording.
[
SP
]:
Monaural standard recording.
[
LP
]:
Monaural long-term recording.
• To record a meeting and lecture clearly, set
other than [
LP
] in [
Rec Mode
].
• When the external monaural microphone
is used while [
Rec Mode
] is set to a stereo
recording mode, it enables recording only
with the L channel microphone.
Low Cut Filter
The recorder has a Low Cut Filter function to
minimize low-frequency sounds and record
voices more clearly. This function can reduce
noise from air conditioners, projectors and
other similar noises.
[
On
]:
Enables the Low Cut Filter function.
[
Off
]:
Disables this function.
VCVA
When the microphone senses that
sounds have reached a preset threshold
volume level, the built-in Variable Control
Voice Actuator (VCVA) starts recording
automatically, and stops when the volume
drops below the threshold level. The
VCVA feature extends recording time and
conserves memory by stopping recording
during silent periods, which helps the
playback to be more efficient.
[
On
]:
Enables the VCVA function. Will start
recording in VCVA mode.
[
Off
]:
Disables this function. Will resume
recording in normal mode.
Adjust the start/stop actuation
level:
1
Press
the
REC
s
button to start
recording.
• When the sound volume is lower than
the preset threshold sound level,
recording automatically stops after
1 sec approximately, and [
Standby
]
flashes on the display. The recording
indicator light glows when recording
starts and flashes when recording
pauses.
2
Press
the
9
or
0
button
adjust the start/stop actuation
level.
• The VCVA level can be set to any of 15
different values.
• The higher the value, the more
sensitive the recorder to sounds. At
the highest value, even the faintest
sound will activate recording.
a
Level meter (varies according to the
sound volume being recorded)
b
Start level (moves to the right/left
according to the set level)
• The start/stop actuation level also varies
depending on the selected microphone
sensitivity mode (
☞
P.23 or P.38 ).
• If the starting level is not adjusted within
2 seconds, the display will return to the
previous.
• If the surrounding noise is loud, the
starting sensitivity of the VCVA can be
adjusted according to the recording
situation.