Olympus SZ-11, Инструкция по эксплуатации

Страница: 27 / 80

27
EN
3
Move the camera slowly while keeping it straight, and
stop the camera where the pointer and target mark
overlap.
●
The camera releases the shutter automatically.
OK MENU Save Cancel
AUTO AUTO
To combine only two pictures, press the
A
button
before taking a third frame.
4
Repeat Step
3
to take a third frame.
●
After the third frame is taken, the camera
automatically processes the frames and the
combined panorama image is displayed.
To exit the panorama function without saving an
image, press the

button.
If the shutter does not automatically release, try
[Manual] or [PC].
Taking pictures with [Manual] Taking pictures with [Manual]
1
Use
FGHI
to specify at which edge the next
picture is to be connected.
Direction for
combining the next
frame
OK Set
MANUAL MANUAL
2
Press the shutter button to take the fi rst frame. The
white-boxed part of the fi rst frame is displayed on joint
area 1.
1st frame
1 2 1 2
MENU OK Save Cancel
MANUAL MANUAL MANUAL MANUAL
3
Compose the next shot so that joint area 1 overlaps
joint area 2.
4
Press the shutter button to take the next shot.
Press the
A
button to combine just 2 frames.
5
Repeat steps
3
and
4
to take a third frame.
●
After the third frame is taken, the camera
automatically processes the frames and the
combined panorama image is displayed.
To exit the panorama function without saving an
image, press the

button.
Taking pictures with [PC] Taking pictures with [PC]
1
Use
FGHI
to select the direction that the frames
are combined.
2
Press the shutter button to take the fi rst frame, and
then point the camera for the second frame. The
shooting procedure is same as that of [Manual].
Panorama shooting is possible for up to 10 frames.
3
Repeat Step
2
until the number of desired frames is
taken, and then press the
A
button or

button
when fi nished.
Refer to the PC software help guide for details on
how to make panorama images.