
Image Acquisition Software getIT
7
Image Acquisition Software getIT
In addition to your camera, you have also received the image acquisition
software getIT. The software offers the basic functions you need to acquire,
view, calibrate, save, load, and print images.
For more complicated tasks, you can connect your camera to a special software
environment for image analysis and management. Olympus offers you a wide
range of imaging system solutions which can be adapted to your individual
needs in many different fields of application in the areas of sciences, industry,
and medicine. They provide you with much more possibilities than getIT as they
enable integrated acquisition, processing, visualization, and analysis of images,
as well as device control, automatization, administration, networking, database
archiving, and the results documentation.
Installation of the software including the camera driver
The following step-by-step instructions outline the principles of a generic instal-
lation. You' ll find more detailed step-by-step instructions in the appendix (see
page 41). They apply for any camera.
1)
Close any and all application programs.
2)
Place the installation CD into your computer's CD-ROM drive.
"
The setup program will start automatically - unless you have deacti-
vated the autorun function. If so, start the setup.exe file via Windows
Explorer with a doubleclick.
3)
An installation wizard guides you through the entire software installation.
Simply follow the onscreen instructions and select the relevant entries. Se-
lect the camera you wish to use.
"
The TWAIN camera driver which is necessary for using the camera is
installed together with the software.
4)
After you have successfully installed your software, you may now connect
your camera to your PC.
"
The camera driver is not signed and therefore not used automatically
under your operating system. So you will have to register the camera
driver with your operating system.
5)
Doubleclick the getIT program symbol to start the software.
6)
Within the image acquisition software click the
Set Input
button to check to
see if the camera driver has been integrated successfully into the software.
"
Your camera driver has been integrated successfully if the camera is
shown in the
Set Input
dialog box.
"
If your camera does not appear in the
Set Input
dialog box, click the
New
Channel
button. Select your camera from the
Available devices
list and
click
OK
. Your camera driver should now be integrated successfully.
Warning
Install the image acquisition software getIT before connecting your camera to
your PC. This is necessary so that the operating system does not install the
wrong TWAIN camera driver. The TWAIN camera driver which is necessary for
using the camera is installed together with the software. See page 13 for more
information about TWAIN.
Содержание SC30
Страница 1: ...User Manual SC30 3 MegaPixel CMOS Color Camera for Light Microscopy...
Страница 11: ...The GUI User Interface of getIT 11...
Страница 62: ...Appendix V EMC declaration SC30 62 Appendix V EMC declaration SC30...
Страница 63: ...Appendix VI RoHS declaration SC30 63 Appendix VI RoHS declaration SC30...