1
These microscopes employ a UIS2 (UIS) (Universal Infinity System) optical design, and should be used
only with UIS2 (UIS) eyepieces, objectives, observation tubes, etc. Less-than-optimal performance may
result if inappropriate accessories are used.
The MX61L microscope is compatible with a stage stroke of 300 mm (12 inches) and the MX61
microscope is compatible with that of 200 mm (8 inches).
SAFETY PRECAUTIONS
1. Always use the power cord provided by Olympus. If no power cord is
provided, please select the power cord by referring to the section “PROPER
SELECTION OF THE POWER SUPPLY CORD” at the end of this instruction
manual. If the proper power cord is not used, Olympus can no longer
warrant the electrical safety performance of the equipment. Lay out the
power cord at a sufficient distance from the sources of heat such as the
power supply unit/light source and lamp housing to avoid contact with
these heat sources.
2. To avoid potential shock hazard, always set the main switch @ to (OFF)
and disconnect the power cord before replacing the burner or connecting/
disconnecting motorized parts. And since the system contains motorized
parts, do not plug in the power cord until all of the assembly procedures
have completed.
}Always use the lamp bulb or burner supplied by Olympus.
Bulb/Burner
Model
Average Life
IMPORTANT
Halogen bulb
· 12V100WHAL-L (Long life type)
(PHILIPS 7724)
2000 hrs.
· 12V100HAL (High-resolution type)
(PHILIPS 7023)
50 hrs.
Mercury burner
· USH-103OL
(USHIO)
300 hrs.
· HBO103W/2
(OSRAM)
300 hrs.
Xenon burner
· UXL-75XB-A
(USHIO)
200 hrs.
Halogen bulb for
light guide light
source
· JCR12V-100WB
(USHIO)
1000 hrs.
3. Do not light the mercury or xenon burner while it is not mounted on the
microscope because the UV rays in their light are harmful to your eyes.
The used mercury burner should be disposed of as an industrial waste.
If you cannot dispose of it properly, contact Olympus.
4. The eye point of this microscope can be adjusted in the range between
408 and 560 mm above the desktop surface. Prepare a microscope
desk with an optimum height for the application of the customer.
Fig. 1
@
