37
7
Error Code List
The following table lists the error codes, their causes and remedies.
If the error recurs after applying the remedies described below, contact Olympus.
Error
Position
Phenomenon
Cause
Remedy
Code
E01120
Command
Parameter error
The input string is errone-
ous.
Check the string used in the
transmitted command.
E01130
Revolving nosepiece
Not connected error
Nosepiece connection fail-
ure.
Check the nosepiece connec-
tion.
The nosepiece is not con-
nected.
Connect the nosepiece.
The connected nosepiece
is not the designated
model.
Connect the designated nose-
piece.
Aperture iris diaphragm
Not connected error
Cable wire disconnection.
Contact Olympus.
E01150
Command
Negative
acknowledgement
to a query
command
A string was sent after a
query command.
Re-check the command to be
sent.
E01511
Command
System Busy
The 1LOG IN command
was sent in the middle of
operation of a motorized
module.
The 1LOG IN command cannot
be issued while a motorized
module is being driven.
Issue the 1LOG IN command af-
ter the drive of the motorized
module has completed.
E11214
Revolving nosepiece
Time-out error
The operation was not
completed in the specified
period of time.
Revolving nosepiece: Check if
there is an obstacle for move-
ment.
E11218
Revolving nosepiece
Abnormality error
Irrecoverable error.
Contact Olympus.
E11271
Aperture iris diaphragm
Origin error
Aperture iris diaphragm ini-
tialization after power ON
has not completed.
Switch on the power again.
E11272
Aperture iris diaphragm
Abnormality error
Irrecoverable error.
Contact Olympus.
E11278
Aperture iris diaphragm
Abnormality error
Irrecoverable error.
Contact Olympus.
