94
6
EN
Troubleshooting
Troubleshooting
Symptom
Probable cause
Action
Voice files are not
recorded in stereo
The connected external microphone
is monaural.
When recording while an external
monaural microphone is connected,
sound will only be recorded by the
L-channel.
[
Rec Mode
] is set to a monaural
recording mode.
Set [
Rec Mode
] to the stereo
recording mode (
☞
P.51).
[
Zoom Mic
] is set to the
+
side.
Set [
Zoom Mic
] to [
Off
] (
☞
P.52).
Cannot find the
recorded Voice File
Wrong folder.
Switch to the correct folder
(
☞
P.27 to P.29).
Noise heard during
playback
The recorder was shaken during
recording.
———
The recorder was placed near a cell
phone or fluorescent lamp while
recording or during playback.
Move the recorder.
The settings of the connected external
microphone do not correspond to
those of the recorder.
When a microphone not supported
by the plug-in power function is
connected, turn the [
Plug-inPower
]
setting to [
Off
] (
☞
P.56).
Unable to hear any
sound from the
earphone through the
recording monitor
[
Rec Monitor
] is set to [
Off
].
Set [
Rec Monitor
] to [
On
] (
☞
P.55).
Unable to erase the
file
The file is locked.
Unlock the file (
☞
P.50).
The file is read-only.
Unlock the file or cancel the read-only
setting of the file on the PC.
Unable to erase the
folders
There is a file which cannot be
recognized by the recorder in the
folder.
Connect the recorder to your PC and
erase a folder (
☞
P.87).
Noise is audible
through the recording
monitor
Acoustic feedback is occurring.
When the built-in speaker amps and
the like are connected there is a risk
that audio feedback will occur while
recording. It is recommended that
you use earphones for the recording
monitor, or turn the [
Rec Monitor
] to
[
Off
] while recording (
☞
P.55).
Perform adjustments, such as further
distancing the earphones from
the microphones, not pointing the
microphones at the earphones, or
lowering the volume of the recording
monitor.
