52
4
EN
Menu setting method
Menu setting method
• If too big sound is input, the noise may
occur even if [
Rec Level
] is set to [
Auto
]
or [
Limiter ON
]. Also, in certain cases
the [
PEAK
] indicator light, which notifies
large input, may not light. To ensure
successful recordings, we recommend
that you test the record function and
volume before use.
• The level can be adjusted from [
01
] to
[
16
]. The higher the number, the higher
the level and the larger the indicator
position on the level meter.
Zoom Mic
The directional microphone function utilizes
DiMAGIC’s (DiMAGIC Co., Ltd.) DiMAGIC
Virtual Microphone (DVM) technology.
DVM is an audio pickup system which
allows you to record by focusing on sound
from any direction. From expansive stereo
recording to high directivity recording, DVM
represents the latest in directional control
methods that can be switched, using the
built-in stereo microphone.
Low Cut Filter
The recorder has a Low Cut Filter function to
minimize low-frequency sounds and record
voices more clearly. This function can reduce
noise from air conditioners, projectors and
other similar noises.
[
300Hz
]:
Use this setting when sufficient effects
cannot be obtained with the [
100 Hz
]
setting.
[
100Hz
]:
This setting will reduce the noise
generated from air conditioners or
projectors. It is effective for indoor
recording.
[
Off
]:
Disables this function.
• When you increase the value, the
directivity will narrow.
• Decreasing the value widens the
directivity, enables you to record in a
expansive stereo sound.
• If you reduce the directivity and widen
the recording range, you can record in a
sound with expansive stereo feeling.
Directivity
(high)
Directivity
(low)
Sound
collection
(narrow)
Sound
collection
(wide)
About the Zoom Mic function:
