55
GX53
Attaching to GX-FSL
Place the filter slider on the desk with the display surface a of the
slider facing up.
Insert the dedicated screwdriver d provided with the microscope
frame into the notch c on the filter holding ring b and rotate the
screwdriver counterclockwise to remove the filter holding ring b .
Insert the filters with display surfaces e of the slider facing up.
Screw in the holding ring b to clamp firmly.
When using two filter sliders
Insert the filters with display surfaces e of the slider facing down.
The filter display surface e is same direction when the filter
sliders are set to the microscope frame, bacause the filter slider
is used upside down.
Screw in the holding ring b to clamp firmly.
1
2
3
4
3
TIP
4
d
a
2
b
e
c
