Olympus FE-47, Инструкция по эксплуатации

Страница: 52 / 59

52 EN
Battery Handling Precautions
Olympus NiMH batteries (included in some areas)
are intended for use only with Olympus digital
cameras. Never use these batteries with any other
device.
Always charge NiMH batteries (included in some
areas) before using them for the
fi rst time, or if
they have not been used for a long period.
Always charge sets of batteries (included in some
areas) (2 or 4) together.
Do not use alkaline batteries unless it is absolutely
necessary. In some cases, alkaline batteries may
have a shorter service life than NiMH. Alkaline
battery performance is limited, especially at
low temperatures. The use of NiMH batteries is
recommended.
AA manganese (Zinc-Carbon) batteries cannot be
used with this camera.
When operating the camera with battery power
at low temperatures, try to keep the camera
and spare batteries as warm as possible.
Batteries which run down at low temperatures
may be restored after they are warmed at room
temperature.
Recommended temperature ranges for NiMH
batteries:
Operation ................... 0°C to 40°C (32°F to 104°F)
Charge ....................... 0°C to 40°C (32°F to 104°F)
Storage.......................-20°C to 30°C (-4°F to 86°F)
Using, charging or storing the batteries outside
these ranges could shorten battery life or affect
battery performance. Always unload the batteries
from the camera before storing the camera for a
long period.
Before using NiMH batteries, always read the
provided instructions.
The number of pictures you can take may vary
depending on the shooting conditions or batteries.
Before going on a long trip, and especially before
traveling abroad, purchase an ample supply of
extra batteries. The recommended batteries may
be dif
fi cult to obtain while traveling.
Please recycle batteries to help save our planet’s
resources. When you throw away dead batteries,
be sure to cover their terminals and always
observe local laws and regulations.
•
•
•
•
•
•
•
•
•
•
•
•
LCD Monitor
Do not push the monitor forcibly; otherwise the
image may become vague, resulting in a playback
mode failure or damage to the monitor.
A strip of light may appear on the top/bottom of the
monitor, but this is not a malfunction.
When a subject is viewed diagonally in the
camera, the edges may appear zigzagged on the
monitor. This is not a malfunction; it will be less
noticeable in playback mode.
In places subject to low temperatures, the LCD
monitor may take a long time to turn on or its
color may change temporarily. When using the
camera in extremely cold places, it is a good idea
to occasionally place it in a warm place. An LCD
monitor exhibiting poor performance due to low
temperatures will recover in normal temperatures.
The LCD used for the monitor is made with
high-precision technology. However, black spots
or bright spots of light may appear constantly on
the LCD Monitor. Due to its characteristics or the
angle at which you are viewing the monitor, the
spot may not be uniform in color and brightness.
This is not a malfunction.
Legal and Other Notices
Olympus makes no representations or warranties
regarding any damages, or bene
fi t expected by
using this unit lawfully, or any request from a third
person, which are caused by the inappropriate use
of this product.
Olympus makes no representations or warranties
regarding any damages or any bene
fi t expected
by using this unit lawfully which are caused by
erasing picture data.
•
•
•
•
•
•
•