
Chapter 3 Preparation and Inspection
35
EVIS EXERA TJF TYPE 160VR OPERATION MANUAL
8.
Hold the bottom end of the distal cover and turn it to adjust the indication
mark to the straight position as shown in Figure 3.21.
Figure 3.21
9.
Confirm that the bottom end of the distal cover does not spread as shown by
the arrows in Figure 3.22, and that the white ring of the distal end is not
covered by the distal cover as shown in Figure 3.22. Stroke the distal cover
with your fingers and pay attention that the distal cover is not put over the
distal end as shown in Figure 3.23. Otherwise, the distal cover may be
damaged. When Continuing the examination with the condition like
mentioning above is confirmed, the distal cover may slip off the distal end
during the examination. Replace the distal cover with a new one.
Figure 3.22
Indication mark
White ring
Normal
Abnormal
Содержание EVIS EXERA TJF-160VR
Страница 2: ......
Страница 74: ...70 Chapter 5 Troubleshooting EVIS EXERA TJF TYPE 160VR OPERATION MANUAL...
Страница 88: ......