15
En
Loading the battery
1
Make sure that the camera's power
switch is set to
OFF
.
2
Slide the battery compartment lock to
and open the battery compartment
cover.
3
Load the battery as shown in the
illustration.
●
Make sure the power switch is set to
OFF
and the card access lamp is not
blinking.
●
Tilt the camera while holding in the
battery. Carefully remove the battery
without dropping it.
Unloading the battery
Battery compartment lock
Battery compartment cover
Power switch
Direction indicating mark
01E-300BaEN-P1 04.10.21 9:48 PM Page 15