26
En
1
Place the AF frame on the subject
while viewing through the viewfinder.
2
Adjust the focus.
Press the shutter button gently (halfway).
●
The focus is locked. The AF confirmation
mark and the AF focusing frame light up in
the viewfinder.
●
The shutter speed and aperture value that
have been set automatically by the camera
are displayed.
●
The control panel screen is not displayed
when the shutter button is pressed.
3
Release the shutter.
Press the shutter button all the way (fully).
●
When a picture is taken, a shutter sound is
output.
●
The card access lamp blinks and the camera
starts recording the picture.
●
After 1 minute without any operation being
performed, the monitor turns off and the
camera stops operating. To wake up the
camera, simply press any button, e.g. the
shutter button. After about 1 hour without
being used, the camera will turn off
automatically. Turn on the camera again.
Shooting
Shutter button
AF confirmation mark
Viewfinder
AF frame
Halfway down
All the way down
Card access
lamp
–.– – –
–.–
.–
ESP
P
AUTO
FP
FOCUS
AUTO
AUTO
ISO
DRIVE
S-AF
AF ILLUMINATOR
HQ
2448
3264
WB
s
RGB
Memory gauge
01E-300BaEN-P1 04.10.21 9:49 PM Page 26