65
EN
Frequently-used options and customization (Shooting menus)
3
3
Take pictures.
•
a
is displayed in green when shooting starts.
• Press
to delete the last shot.
• The previous shot is superimposed on the view through the lens as a guide to
framing the next shot.
%
Tips
• To overlay 3 or more frames: Select RAW for [
K
] and use the [Overlay] option to make
repeated multiple exposures.
• For more information on overlaying RAW images:
g
[Edit] (P. 67)
#
Cautions
• The camera will not go to sleep while multiple exposure is in effect.
• Photographs taken with other cameras cannot be included in a multiple exposure.
• When [Overlay] is set to [On], the images displayed when a RAW image is selected are
developed with the settings at the time of shooting.
• To set the shooting functions, cancel multiple exposure shooting rst. Some functions
cannot be set.
• Multiple exposure is cancelled automatically from the rst picture in the following
situations.
The camera is turned off/The
q
button is pressed/The
MENU
button is pressed/The
shooting mode is set to a mode other than
P
,
A
,
S
,
M
/The battery power runs out/
Any cable is connected to the camera/You switch between the monitor and electronic
view nder
• When a RAW image is selected using [Overlay], the JPEG image for the image recorded
in JPEG+RAW is displayed.
• When shooting multiple exposures using bracketing, priority is given to multiple exposure
shooting. While the overlay image is being saved, bracketing is reset to the factory default
setting.
Shooting automatically with a xed interval (time lapse shooting)
You can set the camera to shoot automatically with a set time lapse. The shot frames
can also be recorded as into a single movie. This setting is only available in
P
/
A
/
S
/
M
modes.
1
Perform the following settings under [Time Lapse Settings] in
X
Shooting
Menu 2.
Frame
Sets the number of frames to be shot.
Start Waiting Time
Sets waiting time before starting to shot.
Interval Time
Sets interval between shots after shooting starts.
Time Lapse Movie
Sets recording format of frame sequence.
[Off]: Records each frame as a still picture.
[On]: Records each frame as a still picture and generates and
records a single movie from the frame sequence.
• The image quality of the movie is [M-JPEG HD] and the frame rate 10fps.