Shooting
2
66
EN
Using a flash (
Flash photography)
The flash can be set manually as required. The flash can be used for flash
photography in a variety of shooting conditions.
1
Rotate the
ON/OFF
lever to
#
UP
to raise the flash.
ON/OFF
lever
2
Press
I
.
3
Select an item using the front dial and press the
Q
button.
• The options available and the order in which they are displayed vary depending on
the shooting mode.
g
“Flash modes that can be set by shooting mode” (P. 67)
#
Flash
The flash fires regardless of the light conditions.
• Shutter speed can be set to values between that
selected for [
#
Slow Limit] (P. 124) and [
#
X-Sync.] (P. 124) in
G
Custom Menu
b
.
0
Red-eye reduction flash
The flash fires so that the red-eye phenomenon is
reduced.
$
Flash off
The flash does not fire.
1
Slow synchronization
(1st curtain)/Red-eye
reduction flash
The slow synchronization is combined with the red-
eye reduction flash.
2
Slow synchronization
(1st curtain)
The flash fires with slow shutter speeds to brighten
dimly-lit backgrounds.
M
Slow synchronization
(2nd curtain)
The flash fires immediately before
the shutter closes to create trails of
light behind moving light sources.
3
,
4
etc.
Manual flash
For users who prefer manual operation. Press the
INFO
button and use
FG
to adjust flash output.
• In [
0
(Red-eye reduction flash)], after the pre-flashes, it takes about 1 second before the
shutter is released. Do not move the camera until shooting is complete.
• [
0
(Red-eye reduction flash)] may not work effectively under some shooting conditions.
•
When the flash fires, the shutter speed is set to 1/250 seconds or slower. When shooting a
subject against a bright background with the flash, the background may be overexposed.
•
In the silent mode (P. 69), the shutter speed when the flash fires is set to 1/20 seconds
or slower.
Содержание E-M10 Mark III
Страница 172: ......
Страница 173: ...WD745600 date of issue 2020 05...