16
Lens basics
En
4
Align the lens attachment mark (red) on
the camera with the alignment mark
(red) on the lens, then insert the lens
into the camera’s body. Rotate the lens
clockwise until you hear it click.
5
Remove the lens cap.
Removing the lens from the camera
1
Make sure the power switch is
set to OFF.
2
While pressing the lens release
button, remove the lens from
the camera by rotating it
counterclockwise.
Lens cap
Alignment mark (Red)
Lens attachment mark (Red)
Lens release button
s0004_oe_Basic.book Page 16 Friday, September 16, 2005 6:51 PM