19
Card basics
En
Removing the card
1
Make sure that the card access lamp is
not illuminated.
2
Open the card cover.
3
Remove the card.
4
Close the card cover.
Compact Flash/Microdrive
xD-Picture Card
• Press the eject button gently and let it
pop out, then press it again all the way in.
The card will be ejected a short way so
that you can pull it out.
• If you press the eject button too hard, the
card may jump out of the camera.
• Pull out the card.
• Press the card as shown in the
illustration. The card will be
ejected.
Card access lamp
Eject button
s0004_oe_Basic.book Page 19 Friday, September 16, 2005 6:51 PM