Olympus DS-5500 Скачать руководство пользователя страница 55

Страница: 55 / 63

Alarm message list

Other information

Alarm message list

Message

Explanation

Action

[Battery Low]

The battery power is low.

Charge or replace the batteries (

☞

P.13).

[Cannot Charge]

An abnormal high/low temperature was

detected or an error occurred during charging.

Charge the batteries in an environment at

normal temperature or eliminate the cause of

the error.

[Power Supply Error

Remove Power Plug]

Voltage outside of the allowable limit has been

detected.

Use the included AC Adapter (

☞

P.17).

[File Protected]

Editing or deleting the file is not possible.

Unlock the file (

☞

P.40).

[Index Full]

The maximum number of Index marks has been

reached (max 32 Index marks per file).

Erase unnecessary index marks (

☞

P.37).

[Verbal Comment Full]

The maximum number of Verbal comments

has been reached (max 32 Verbal comments

per file).

Erase unnecessary Verbal comments (

☞

P.36).

[Folder Full]

The maximum number of files has been reached

(max 200 files per folder).

Erase unnecessary files (

☞

P.29).

[Erase Error]

An error occurred while erasing.

Erase once again. When an Erase Error occurs,

format the card (

☞

P.45).

[Memory Error]

The built-in memory has a problem.

Format the built-in memory (

☞

P.45).

[SD Card Error]

The card has not been recognized properly.

Remove the card and insert it again (

☞

P.19).

[Memory Full]

No remaining memory.

Erase unnecessary files or insert another card

(

☞

P.19, P.29).

[Format Error]

There was an error while formatting the

memory.

Format the memory again (

☞

P.45).

[Can’t make the

system file. Connect

to PC and delete

unnecessary file]

The management file cannot be created due to

insufficient space on the card.

Connect the recorder to a computer and delete

unnecessary files.

Содержание DS-5500
































































Результаты поиска

Содержание DS-5500

Отзывы:

Похожие инструкции для DS-5500

Бренды по названию

Популярные бренды

Olympus DS-5500, Инструкция по эксплуатации

Результаты поиска

Содержание DS-5500

Отзывы:

Похожие инструкции для DS-5500

Бренды по названию

Популярные бренды