Olympus DS-5500 Скачать руководство пользователя страница 52

Страница: 52 / 63

tin

g t

o y

r P

Connecting to your PC

Connecting to your PC using the docking station

The “Standard” version of the DS-5500 does not include the docking station

(optional).

Place the recorder in the docking station

Connect the USB cable to the USB port of the PC.

Connect the USB cable to the docking station as shown in the

illustration.

Set the recorder in the docking station.

• [Remote (Composite)] or [Remote (Storage)] is displayed on the

recorder if the USB cable is connected.

• If the AC adapter is connected as well, power will be supplied from the

AC adapter.

Disconnecting from your PC

Windows

Click [

] on the task bar located at the lower-right corner of

the screen. Click [

Safely remove USB Mass Storage Device

• The drive letter will differ depending on the PC being used.

Confirm that the status indicator light turns off before

disconnecting the USB cable.

Macintosh

Drag and drop the recorder’s drive icon for this recorder

displayed on the desktop to the Recycle Bin icon.

Confirm that the status indicator light turns off before

disconnecting the USB cable.

Notes

• NEVER remove the card or disconnect the USB cable while the status

indicator light is flashing. If you do, the data will be destroyed.

• Never touch the contact points at the bottom of the docking station, as this

may cause a bad connection.

• With a PC connected, the recorder cannot be operated with the Foot

Switch. When connecting the recorder to a PC via the docking station,

remove the Foot Switch.

Содержание DS-5500
































































Результаты поиска

Содержание DS-5500

Отзывы:

Olympus DS-5500, Инструкция по эксплуатации, Страница: 52 / 63

Результаты поиска

Содержание DS-5500

Отзывы: