40
3
EN
M
en
u i
tem
s
Menu items
134
/134
VERBAL DISPLY
INDEX
MIKE
Standby
E
F
1
H
25
M
01
s
QP
DICT
Ni
VCVA
b
a
134
/134
VERBAL DISPLY
INDEX
MIKE
VCVA Level 05
E
F
1
H
25
M
02
s
QP
DICT
Ni
VCVA
c
LCD/Sound Menu
Backlight
When the display backlight is set to [
On
], the
backlight will light up for about 10 seconds when a
button is pressed.
[
On
]:
Backlight is enabled.
[
Off
]:
Backlight is disabled.
Contrast
You can adjust the LCD display contrast level from
[
01
] to [
12
].
• The contrast becomes darker as the numerical
value becomes larger.
LED
You can set it so the record indicator light does not
turn on.
[
On
]:
LED light will be set.
[
Off
]:
LED light will be canceled.
Beep
When the Beep is set to [
On
], the recorder will beep
in case of error.
[
On
]:
Beep is enabled.
[
Off
]:
Beep is disabled.
Language (Lang)
You can set the language for the recorder’s user
interface.
[
Čeština
] [
Dansk
] [
Deutsch
] [
English
] [
Español
]
[
Français
] [
Nederlands
] [
Polski
] [
Русский
]
[
Svenska
]:
• The languages available may vary depending
on the country/region where the product is
purchased.
Adjust the start/stop actuation level:
While the recorder is in recording mode,
press the
9
or
0
button to adjust the
actuation level.
• The VCVA level can be set to any of 15 different
values.
• The higher the value is, the more sensitive the
recorder can react to sounds. At the highest value,
even the faintest sound will activate recording.
• The VCVA actuation level can be adjusted
according to the ambient (background) noise.
C
Start level (moves to the
right/left according to the
set level)
• The start/stop actuation level also varies
depending on the selected microphone sensitivity
mode (
☞
P.37).
• To ensure successful recordings, prior testing and
adjustment of the start/stop actuation level is
recommended.
a
VCVA indicator
b
Level meter (varies
according to the sound
volume being recorded)
• When the sound volume is lower than the
preset actuation sound level, recording
automatically stops after 1 second
approximately, and [
Standby
] flashes on
the display. The status indicator light turns
on when recording starts and flashes when
recording pauses.
