34
3-3 Connecting the External Trigger Cable
} Please read this section only when you use the external trigger
function. If you will not use the external trigger function, it is not
necessary to connect the external trigger cable.
For the external trigger function, refer to “6. EXTERNAL TRIGGERING”
(P. 39).
Insert the connector of the external trigger cable to the connector
a
on
the PCIe interface board in the desktop PC or the PCIe extension box.
When using the trigger input, connect the red cable (marked “ I ” )
b
to the BNC connector.
When using the trigger output, connect the white cable (marked “O” )
c
to the BNC connector.
The external triggering is available only when the cellSens /
OLYMPUS Stream software is run.
1
2
3
CAUTION
1
1
2 3
Desktop PC
PCIe Extension Box
a
a
b
c
