49
3
Playing Images Back
HELP
• After turning the power on, the monitor may flash and display an image
after 0.5 to 2 seconds. This is not a malfunction.
Turning the Power Off in Playback Mode
1
Press the monitor button.
• The monitor display shuts
down and the power turns off.
1
48
Chapter 3 Playing Images Back
Getting Started
Turning the Power On in the Playback Mode
1
Make sure the lens barrier is
closed.
2
Press the monitor button.
• The camera turns on in
playback mode and the
monitor displays the last
image taken.
• “NO PICTURE” is displayed
on the monitor if no pictures
have been taken.
Any problems with the card
are indicated on the monitor
(p.55).
• The battery check mark
blinks when the batteries
are running low.
Standby mode
If the camera is left untouched for three minutes when using the
batteries, it automatically turns off. It is strongly recommended,
however, that you switch power off promptly when you are finished
using the camera.
When using new batteries, it may take longer for the camera to shut
down automatically depending on the type of batteries being used.
CAUTION
• Never open the card compartment cover, remove the batteries or card, or
disconnect the AC adapter while the camera is in operation as this could
result in damage to the data stored on the card.
• Do not press on the monitor as this could leave a mark on the screen,
interfere with image display, or even crack the monitor.
2
1
