© Copyright 2000. Olympus Optical Co., Ltd. All rights reserved.
Legal and other notices
• The contents of this document are subject to change without prior
notice.
• Although the contents of this document have been carefully checked
to avoid errors, some may still occur. If you have a question about any
point, or you find mistakes or omissions, please contact us.
• No part of this publication may be reproduced or reprinted except for
personal use without prior written permission from Olympus.
• Olympus makes no representations or warranties regarding any
damages, or benefit expected by using this unit lawfully, or any
request from a third person, which are caused by the inappropriate
use of this product.
• Olympus makes no representations or warranties, regarding any
damages or any benefit expected by using this unit lawfully, caused by
erasing picture image data.
Trademarks
• IBM is a registered trademark of International Business Machines
Corporation.
• Microsoft and Windows are registered trademarks of the Microsoft
Corporation.
• Macintosh is a trademark of Apple Computer Inc.
• CompactFlash and CF are trademarks of San Disk Inc.
• All other company and product names are registered trademarks of
their respective owners.
2
3
IMPORTANT NOTICES
Radio and Televisions Interference
Change or modifications not expressly approved by the manufacturer
may void the user’s authority to operate this equipment. This equipment
has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the distance between the camera and receiver.
• Connect the equipment to an outlet on a circuit different from that to
which the receiver is connected.
Only the included RS-232C serial cable should be used to connect the
camera to a personal computer (PC).
Declaration of Conformity
Model Number: D-490ZOOM
Trade Name:
OLYMPUS
Responsible party: Olympus America Inc.
Address:
2 Corporate Center Drive, Melville, New York 11747-3157
U.S.A.
Telephone number: 631-844-5000
This device complies with Part 15 of the FCC rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including
interference that may cause undesired operation.
This Class B digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations.