Measurement units (m/ft)
119
Se
tt
in
g
s
7
2
Press
ac
to set the year, then
press
d
to move to the month
setting.
• To move back to the previous setting,
press
b
.
• The first two digits of the year are fixed.
3
Repeat this procedure until the
date and time are completely set.
• The time is displayed in the 24-hour
format. Consequently, 2 p.m. is displayed as 14:00.
4
Press
N
.
• For a more accurate setting, press
N
when the time signal hits 00 seconds.
The measurement unit can be selected from either meters or feet in the
manual focus mode.
m
At long ranges, the camera measures in meters, and at short ranges in
centimeters.
ft
At long ranges, the camera measures in feet, and at short ranges in inches.
Top menu
[MODE MENU]
[SETUP]
[m/ft]
[m] / [ft]
g
“Menus” (P.16)
Note
• The date and time settings will be returned to the factory default settings if the
camera is left without the battery for approximately 3 days. The settings will be
canceled more quickly if the battery was only loaded in the camera for a short
time before being removed. Before taking important pictures, check that the
date and time settings are correct.
• If the date and time setting is canceled, a warning is displayed on the monitor
the next time the camera is turned on.
g
“Error codes” (P.158)
20
0
5 . 01
01
00
00
:
.
GO
OK
SET
SELECT
Measurement units (m/ft)
Mode dial
d4250_e_00_0_bookfile.book Page 119 Friday, December 24, 2004 11:45 AM