En
33
En
J
ERASING PICTURES
This function enables you to erase recorded pictures. You can choose the
single-frame erase or the all-frame erase.
• You cannot erase pictures that are protected. Cancel the protection
before erasing such pictures.
• Once erased, pictures cannot be restored. Be careful not to
accidentally erase pictures you want to keep.
Single-frame erase
This function erases only the picture displayed on the monitor. The all-frame
erase function can be used to erase all the pictures on the card at once.
1
Set the power switch at
.
• The monitor turns on and displays the last picture taken.(Single-frame
playback)
2
Use the arrow pad to display the picture you want to
erase.
3
Press
Z
.
• The top menu is displayed.
4
Press
to select
ERASE.
5
Press
to select YES, and press
Z
.
• The picture is erased and the menu is closed.
All-frame erase
1
In the playback mode top menu, select MODE MENU
→
CARD
→
CARD SETUP, and press .
2
Press
to select
ALL ERASE, and press
Z
.
3
Press
to select YES, and press
Z
.
• All the pictures are erased.
Note
basic.book Page 33 Sunday, May 22, 2005 6:47 PM
