En
15
En
6
Press
to select one of the following date formats:
Y-M-D (Year/Month/Day), M-D-Y (Month/Day/Year), D-M-Y
(Day/Month/Year). Then press .
• Move to the year setting.
• The following steps show the procedure used when the date and time
settings are set to Y-M-D.
7
Press
to set the year, and press to move to the
month setting.
• To move back to the previous setting, press
.
• The first two digits of the year are fixed.
8
Repeat this procedure until the date and time are
completely set.
• The camera only displays the time in 24-hour time system (
“
2 p.m.
”
would be
“
14:00
”
).
9
Press
Z
.
• For a more accurate setting, press
Z
when the time signal hits 00
seconds. The clock starts when you press the button.
10
Slide the power switch to OFF.
• The date and time settings will be returned to the factory default
settings if the camera is left without the battery for approximately 3
days.
Note
basic.book Page 15 Sunday, May 22, 2005 6:47 PM
