3.5 Setting up BXC-CBB
TIP:
Before setting the DIP switch, set the main switch to ○(OFF).
The switch settings are read and defined after Power-ON.
1.
Confirm that the DIP switch on BXC-CBB is set properly.
The allocated functions of the DIP switches are shown in the table below.
: Factory default setting
SW-No.
Function
Note
1
2
3
4
5
6
7
8
Off
Buzzer sound
The buzzer sound is heard
On
The buzzer sound is not heard
Off
Nosepiece (NP)
5Position-NP
On
6Position-NP
Off
AS control*
1
Normal
On
High-precision control (lost motion reduction)
Off
NP Control*
2
Rotate through the highest numbered hole
On
Does not rotate through the highest numbered hole
Off
Reserved by maker Always OFF
On
Off
Reserved by maker Always OFF
On
Off
Reserved by maker Always OFF
On
Off Reserved by maker Always OFF
On
10
3.5 Setting up BXC-CBB
3. Setup procedures
