Olympus BX51M, Инструкция по эксплуатации

Страница: 30 / 36

27
I O
ASSEMBLY
8-1 Assembly Diagram
· The diagram below shows the sequence of assembly of the various modules. The numbers indicate the order of assembly.
· The module numbers shown in the following diagram are merely the typical examples. For the modules with which the
module numbers are not given, please consult your Olympus representative or the latest catalogues.
# When assembling the microscope, make sure that all parts are free of dust and dirt, and avoid scratching any parts
or touching glass surfaces.
}Assembly steps enclosed in will be detailed on the subsequent pages.
}All assembly operations are possible by using the Allen screwdriver ( ) provided with the microscope. However,
the BX-RLA2 vertical illuminator should be attached using the Allen wrench ( ) provided with the illuminator to clamp
the internal screws. (To assure the performance, please have your dealer assemble the illuminator.)
Eyepiece
WHN10X (FN 22)
35WHN10X (FN 22)
SWH10X-H (FN 26.5)
35SWH10X (FN 26.5)
Observation tube
U-BI30-2 (FN 22)
U-TR30-2 (FN 22)
U-TBI3 (FN 22)
U-ETBI (FN 22)
U-SWTR-3 (FN 26.5)
U-SWETTR-2 (FN 26.5)
Intermediate attachment
U-CA
U-ECA
U-DP U-TRU
U-APT U-EPA2
U-SDO3
DIC slider
U-DICR
U-DICRH
U-DICRHC
Rotary wafer holder
BH2-WHR43
Wafer holder
U-WHP2
Glass plate
U-MSSPG
*
Stage plate
U-MSSP4
*
Revolving
nosepiece
U-5RE-2
U-D5BDRE
U-D6RE
U-D6BDRE
Objective
adapter
BD-M-AD
Brightfield
objective
Brightfield/
darkfield
objective
4 x 4 inch stage
U-SIC4R2/U-SIC4L2
Stage
U-SVRM
U-SVLM
Filter
U-25ND6-2
U-25ND25-2
U-25ND50-2
U-25LBD, etc.
Halogen bulb
12V100WHAL-L
12V50WHAL-L
100 W halogen
lamp housing
U-LH100-3
High-intensity
light source
U-LH75XEAPO
U-LH50MH
U-LH100HG
U-LH100HGAPO
Vertical
illuminator
BX-RLA2
Polarizer
U-PO3
U-POTP3
Analyzer
U-AN
U-AN360-3
Microscope frame
BX51RF
Light
guide
LG-SF
Light source
LG-PS2
Power cord
Stage plate
U-MSSP
*
Adapter
U-LGAD
*
Warp prevention pins (2 for each) are attached on the bottom sides of the U-MSSP/MSSP4 stage plate and the U-MSSPG
glass plate when the system is shipped from the factory. Remove the pins before use.