Olympus 38DL PLUS Скачать руководство пользователя страница 163

Страница: 163 / 318

DMTA-10004-01EN, Rev. D, November 2016

Using Advanced Gaging Features

151

To change the highlighted cell in the DB grid

Activate and configure the DB grid (see “Activating and Configuring the DB
Grid” on page 147).

From the measurement screen, press

[ID#]

In the ID review screen (see Figure 10-13 on page 151):

Use the

[



]

[



]

[



]

, and

[



]

keys to highlight the desired grid cell.

Press

[2nd F]

[



]

to jump to the last ID location in the file.

Press

[2nd F]

[



]

to jump to the first ID location in the file.

Press

[ID#]

at any time to edit the displayed ID location.

Figure 10

‑

13 The highlighted DB grid cell in the ID review screen

Press

[MEAS]

to return to the measurement screen with the current ID number

changed to the ID location selected in the ID review screen.
OR
Press

[2nd F]

[MEAS]

to return to measurement screen with the current ID

number unchanged. The current ID location is the last active ID location in the
measurement screen.

Stored waveform for

the highlighted cell

Highlighted cell

Содержание 38DL PLUS































































































































































































































































































































Результаты поиска

Содержание 38DL PLUS

Отзывы:

Похожие инструкции для 38DL PLUS

Бренды по названию

Популярные бренды

Olympus 38DL PLUS, Руководство пользователя

Результаты поиска

Содержание 38DL PLUS

Отзывы:

Похожие инструкции для 38DL PLUS

Бренды по названию

Популярные бренды