Olympia ProHome Base unit, Руководство по эксплуатации

Страница: 43 / 48

43
O
LYMPIA
P
RO
H
OME
APPENDIX
Remote Access by Phone
The wireless alarm system can be operated by remote
access using a telephone.
1
Dial the phone number of the SIM card installed in
the base unit.
2
Wait until the base unit takes your call. A longer
acoustic signal is issued.
3
Enter the 4-digit entry code on the base unit. You will
hear two short acoustic tones.
4
Complete various functions using the phone's key-
pad (refer to the table). The monitoring functions are
confirmed by a voice message.
Key Function
1 Activate the handsfree function
2 Activate call screening
3 Activate Alarm mode
4 Activate At Home mode
5 Activate Silent mode
6 Activate Disarmed mode
# Stop the Handsfree / Call screening function
#, # End remote access
Appendix
Updating Firmware
Before you can update the firmware of your base unit,
the following conditions must be met:
• You have connected up the base unit.
• You have installed the ProHome app on your smart-
phone or tablet.
• You have connected your smartphone or tablet with
your network.
• You have added your base unit as a Gateway in the
ProHome app.
1
Select the FW Update menu option on the base unit.
2
Confirm by pressing
O
.
3
The display shows Confirm? .
4
Confirm by pressing
O
.
The firmware on your base unit is updated; this can take
a few minutes. After conclusion of the update, the display
shows Successful.